Product Data Sheet Show all documents
Sika Boom® P

Sika Boom® P

EXPANSIVE POLYURETHANE FIXING FOAM FOR FILLING AND INSULATING

Sika Boom® P is a 1-component, fast curing polyurethane foam made for easy application with plastic nozzle

  • 1-Component
  • Easy application with nozzle
  • High expanding rate
  • Fast curing
  • Very good thermal insulation
  • Effective sound dampening
  • HFC-free
Find a Distributor
Product Data Sheet Show all documents

Usage

Sika Boom® P is designed for fixing, insulating and filling connection joints around windows and door frames, pipe entries, air-conditioning vents and electrical equipment. Sika Boom® S allows insulation against noise, cold and draughts after a single applicatio  

Advantages

  • 1-Component
  • Easy application with nozzle
  • High expanding rate
  • Fast curing
  • Very good thermal insulation
  • Effective sound dampening
  • HFC-free

Packaging

Sika Boom® P shall be stored in an upright position, in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C.

Colour

Light yellow

Product Details

Product Information

Composition

Polyurethane

Shelf life

Sika Boom® P has a shelf life of 15 months from the date of production, if stored properly in undamaged, original, sealed packaging, and if the stor-

age conditions are met. Opened cans of Sika Boom® P must be used within 4 weeks

Storage conditions

Sika Boom® P shall be stored in an upright position, in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C.

Density

0,022 ± 3 kg/dm3
Technical Information

Compressive strength

0,03 MPa

Dimensional stability

± 10%.

Resistance to fire

B3

Temperature resistance

Aprox. 0,036 W/mK.

Water absorption

Max. 1% volume

Service temperature

-40 °C to +80 °C.

Application

Application Information

Ambient air temperature

+10 °C min. / +30 °C max.

Relative air humidity

30 % min. / 95 % max.

Substrate temperature

+10 °C min. / +30 °C max.

Curing time

Sika Boom® P is fully cured after 12 h

Cutting time

Aprox. 30 minutes

Tack free time

5 to 10 minutes
Consumption

Consumption

Max. aprox. 45 dm3
Application steps

APPLICATION INSTRUCTIONS

For the application of Sika Boom® P all generally accepted rules of building and construction apply.

SUBSTRATE PREPARATION

The substrate must be clean, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed. Sika Boom® P adheres without primers and/or activators. Pre-dampen the substrate with clean water, this ensures that the foam cures properly and also prevents secondary foam expansion.

CLEANING OF EQUIPMENT

Clean all tools and application equipment immediately with Sika Boom®-Cleaner and/or Sika® Remover-208. Once cured, residual material can only be removed mechanically.

Documents