Product Data Sheet Show all documents

Sika® Antisol® E

Concrete curing agent

Sika® Antisol® E is a ready to use spray applied liquid curing agent to prevent water loss from the surface of freshly placed concrete. It forms a thin film barrier on the concrete without affecting the normal setting action. Sika® Antisol® E  complies with ASTM C 309-81 type 1or 2 Class A.

  • Generally improves the surface appearance
  • Reduces cracking
  • Ensures achievement of required strengths
  • Reduces shrinkage
  • Controls cement hydration
  • Reduces dust formation
  • Improves freeze / thaw resistance
  • Alleviates other costly curing methods
Find a Distributor
Product Data Sheet Show all documents

Usage

Large areas of exposed concrete such as:
  • Roads and Highways
  • Runways
  • Roof decks
  • Hangars and loading areas
  • Retaining walls
  • Pre-stressed structures
  • Irrigation channels
  • Civil Engineering structures
  • Industrial floor slabs
 

Advantages

  • Generally improves the surface appearance
  • Reduces cracking
  • Ensures achievement of required strengths
  • Reduces shrinkage
  • Controls cement hydration
  • Reduces dust formation
  • Improves freeze / thaw resistance
  • Alleviates other costly curing methods

Packaging

20 L  and 200 L drum.

Refer to current price list for packaging variations.

Colour

Liquid white pigmented emulsion

Product Details

Product Information

Shelf life

6 months from date of production

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

Density

~0,98 ± 0,05 kg/l

 

Application

Application Information

Equipment

Application

  • Hand type backpack or motorised sprayers
  • Suitability of equipment should be approved before using for full application

Clean all tools and application equipment immediately after use. Hardened material can only be removed mechanically.
Consumption

Consumption

0,15–0,20 kg/m2

Consumption depends on wind speed, temperature and humidity during application.

These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
Application steps

APPLICATION

Stir thoroughly before use to ensure full dispersion of solids.

Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.

Documents