Product Data Sheet Show all documents

Sika® Form Oil

Emulsion based formwork release agent

Sika® Form Oil is a carefully blended combination of refined mineral oils and emulsifying agents, producing a thin film stable release agent for concrete.

Sika® Form Oil provides the following properties:
  • Good adhesion to the formwork
  • Good concrete surface finish
  • Reduces concrete contamination
  • Non-flammable
Find a Distributor
Product Data Sheet Show all documents

Usage

Sika® Form Oil, when applied to:
  • Steel
  • Plastic
  • Timber
Allows clean, fast and easy striking.  

Advantages

Sika® Form Oil provides the following properties:
  • Good adhesion to the formwork
  • Good concrete surface finish
  • Reduces concrete contamination
  • Non-flammable

Packaging

20 and 200 litre drums.

Colour

Milky white liquid

Product Details

Product Information

Composition

Emulsified mineral oil

Shelf life

12 months from date of production if stored properly

Storage conditions

Stored in original unopened, undamaged, sealed packaging. Protect from frost, direct sunlight and contamination. Opened units should be stored closed.

Density

1,0 kg/litre

Application

Application Information

Ambient air temperature

Min.5°C - Max.35°C

Equipment

Apply single coat by brush, roller, cloth or spray.
Consumption

Consumption

  • Timber approximately 20m2 per litre.
  • Steel or plastic approx. 45m2 per litre
Application steps

APPLICATION

  • Shutter surface must be clean and free from dirt and cement laitance.
  • Sika Form oil is supplied ready to use and requires no dilution.
  • Mix contents of drum prior to use, to ensure a uniform application

Documents